Before requesting a fencing quote, it’s helpful to know the exact length of your fence line. Whether you’re replacing an old Colorbond fence or planning a brand-new install, accurate measurements make quoting faster and easier.
We often see homeowners guess their fence length — which can lead to over- or under-quoting.
Measuring takes less than 10 minutes and gives us the information we need to help you!
Step 1 – Grab a Measuring Tool
All you need is one of the following:
- Measuring wheel – Best for all cases, especially long fence lines.
- Tape measure – Good for smaller jobs
- Smartphone measuring app – They work, but a physical tool is better for accuracy.
Make sure your measuring tape or wheel shows metres (m) clearly.
Step 2 – Measure the Total Length
Start at one end of the fence line and walk to the other with your measuring tool.
Think of it as marking out the start and finish points of your future fence.
If there are any corners, mark them with a small peg or spray marker, and measure each section separately. It’s also recommended to measure gate sections individually — it keeps things tidy for material planning and allows us to show itemised pricing per section in your quote.
For straight fence lines, simply measure it up and document it for us.
Example:
Back fence: 22 m
Left side: 33 m
Right side: 33 m
Handgate + fill-in: 3 m
Total: 91 m
Read: Adelaide Fencing Costs: Simple Pricing Guide (2025)
Step 3 – Note the Fence Height and Site Detail
If you already know the height you want, include it when you request your quote.
Common Colorbond fence heights are 1.5 m, 1.8 m, and 2 m.
Also note anything that could affect installation, such as:
- A sloped block or uneven ground
- Areas needing sleepers
- Obstacles like trees, garden beds, or concrete footings
Even a short note like “sloped at the back” or “1 sleeper high on one side” helps us get your quote right the first time.
Read: Do You Need Sleepers Under Your Colorbond Fence? (2025)
Step 4 – For New Builds or Unclear Boundaries
If your fence line isn’t established yet — for example, in a new subdivision — or you’re unsure about where your boundary sits, you can hire a licensed surveyor to confirm it.
Surveyors specialise in marking your exact property line, ensuring your new fence sits in the right legal position.
However, your own measurements are perfectly fine for quoting purposes.
We can always confirm the exact position before installation starts.
Read: Do Neighbours Share the Fencing Cost in Adelaide?
Step 5 – Send Us Your Measurements, Get a Quote!
Once you’ve got your total length and height, head to our 30-second Online Quote Form.
Enter your measurements, answer a few questions about the job, and click submit.
We’ll use your info to calculate materials and contact you with a clear quote (or request for more info) within 24 hours.
Read: 10 Things That Impact The Cost Of Your Fence In Adelaide
Do I Need a Licensed Surveyor For Measurements?
In most cases, you don’t.
For existing properties, a quick measurement is all that’s required for quoting and installation.
However, if you’ve just built a new home or you’re unsure about where your boundary sits, you can engage a licensed surveyor to mark it precisely. They provide official boundary points that ensure your fence is built in the correct legal position.
More info about boundaries and fences from the SA.GOV.AU website
How Accurate Must The Measurements Be?
If it’s within 0.5m, it’s fine and probably won’t require a new quote.
We’ll confirm the length by measuring it ourselves before we order materials and commit to the quoted price.
But if your initial measurement is off by even a metre or two, it just means we need to requote for the correct length.
It’s no big deal, it’s just a little obstacle that could be avoided with accurate measurements.
Common Measuring Mistakes to Avoid
When submitting measurements for a fencing job, DO NOT:
- Guess the length instead of measuring.
- Forget to include side sections or gates
- Forget to account for sloped areas.
- Measure the wrong boundary.
Conclusion
Measuring your fence line doesn’t need to be complicated.
A tape measure or measuring wheel is all you need — walk the line, record the metres, take a few photos, and send it through.
Once we’ve got your measurements and fencing details, we’ll get that quote to you asap.
Already have your info ready?